SunFounder Vincent Kit for Arduino

This is a kit suitable for beginners and knowledgable Arduino learners. The kit uses Mega2560 as the main control board, containing 64 commonly used input and output components, modules and so many basic components (such as resistors, capacitors, transistors, etc.), and it can provide powerful help for you to finish your programming projects.

Download the relevant code from the link below.

• SunFounder Vincent Kit for Arduino

• Or check out the code at Vincent Kit for Arduino - GitHub

If you want to learn another projects which we don’t have, please feel free to send Email and we will update to our online tutorials as soon as possible, any suggestions are welcomed.

Here is the Email: cs@sunfounder.com.

• Components List and Introduction
  • SunFounder Mega Board
  • Prototype Shield
  • Breadboard
  • Resistor
  • Transistor
  • Capacitor
  • Diode
  • Jumper Wires
  • 74HC595
  • L293D
  • LED
  • RGB LED
  • LED Bar Graph
  • 7-segment Display
  • 4-Digit 7-Segment Display
  • LED Matrix Module
  • I2C LCD1602
  • Buzzer
  • DC Motor
  • Servo
  • Stepper Motor
  • Power Supply Module
  • Relay Module
  • Button
  • Slide Switch
  • Potentiometer
  • Joystick Module
  • Rotary Encoder Module
  • Keypad
  • IR Receiver Module
  • MPR121
  • Photoresistor
  • Thermistor
  • Tilt Switch
  • Water Level Sensor Module
  • Sound Sensor Module
  • Touch Switch Module
  • Obstacle Avoidance Module
  • PIR Motion Sensor Module
  • Ultrasonic Module
  • Humiture Sensor Module
  • MPU6050 Module
  • MFRC522 Module
• Play with Arduino
  • 1.1 Get Started with Arduino IDE
  • 1.2 Digital Write
  • 1.3 Analog Write
  • 1.4 Digital Read
  • 1.5 Analog Read
  • 1.6 Digital Input Control Output
  • 1.7 Analog Input Control Output
  • 1.8 Serial Read
  • 1.9 Digital Input Pull-Up
  • 1.10 State Change Detection
  • 1.11 Interval
  • 2.2 LED
  • 2.3 RGB LED
  • 2.4 LED Bar Graph
  • 2.5 7-Segment Display
  • 2.6 74HC595
  • 2.7 4-Digital 7-Segment Display
  • 2.8 LED Matrix Module
  • 2.9 I2C LCD1602 Module
  • 2.10 Active Buzzer
  • 2.11 Passive Buzzer
  • 2.12 Servo
  • 2.13 Motor
  • 2.14 Stepper Motor
  • 2.15 Button
  • 2.16 Slide Switch
  • 2.17 Tilt Switch
  • 2.18 Touch Switch Module
  • 2.19 Keypad
  • 2.20 IR Receiver Module
  • 2.21 Relay Module
  • 2.22 Potentiometer
  • 2.23 Joystick Module
  • 2.24 MPR121 Module
  • 2.25 Rotary Encoder Module
  • 2.26 Photoresistor
  • 2.27 Thermistor
  • 2.28 Sound Sensor Module
  • 2.29 Water Sensor Module
  • 2.30 IR Obstacle Avoidance Sensor
  • 2.31 PIR Module
  • 2.32 DHT11 Module
  • 2.33 Ultrasonic Module
  • 2.34 MPU6050 Module
  • 2.35 RFID-RC522 Module
  • 3.1 Reversing Aid
  • 3.2 Pedestrian Crossing Button
  • 3.3 Overheat Monitor
  • 3.4 Guess Number
  • 3.5 Access Control System
• Play with Scratch
  • 1.1 Install PictoBlox
  • 1.2 Interface Introduction
  • 1.3 Quick Guide on PictoBlox
  • 2.1 Table Lamp
  • 2.2 Breathing LED
  • 2.3 Colorful Balls
  • 2.4 LCD1602
  • 2.5 Moving Mouse
  • 2.6 Doorbell
  • 2.7 Tumbler
  • 2.8 Low Temperature Alarm
  • 2.9 Light Alarm Clock
  • 2.10 Read Temperature and Humidity
  • 2.11 Rotating Fan
  • 2.12 Blow Ball
  • 2.13 GAME - Shooting
  • 2.14 GAME - Inflating the Balloon
  • 2.15 GAME - Star-Crossed
  • 2.16 GAME - Eat Apple
  • 2.17 GAME - Flappy Parrot
  • 2.18 GAME - Breakout Clone
  • 2.19 GAME - Fishing
  • 2.20 Catching Starfish
  • 2.21 GAME - Kill Dragon
• Thank You
• German Online-Tutorials

Copyright Notice

All contents including but not limited to texts, images, and code in this manual are owned by the SunFounder Company. You should only use it for personal study, investigation, enjoyment, or other non-commercial or nonprofit purposes, under therelated regulations and copyrights laws, without infringing the legal rights of the author and relevant right holders. For any individual or organization that uses these for commercial profit without permission, the Company reserves the right to take legal action.