SunFounder Da Vinci Kit for Raspberry Pi

About the Da Vinci Kit

This Da Vinci kit applies to the Raspberry Pi 4 Model B, 3 Model A+, 3 Model B+, 3 Model B, 2 Model B, 1 Model B+, 1 Model A+, zero W and zero. It includes various components and chips that can help to create various interesting phenomena which you can get via some operation with the guidance of experiment instructions. In this process, you can learn some basic knowledge about programming. Also you can explore more application by yourself. Now go for it!

If you want to learn another projects which we don’t have, please feel free to send Email and we will update to our online tutorials as soon as possible, any suggestions are welcomed.

Here is the Email: cs@sunfounder.com.

About the display language

In addition to English, we are working on other languages for this course. Please contact service@sunfounder.com if you are interested in helping, and we will give you a free product in return. In the meantime, we recommend using Google Translate to convert English to the language you want to see.

The steps are as follows.

• In this course page, right-click and select Translate to xx. If the current language is not what you want, you can change it later.

• There will be a language popup in the upper right corner. Click on the menu button to choose another language.

• Select the language from the inverted triangle box, and then click Done.

• Component List
• Introduction
• Preparation
  • What Do We Need?
  • Installing the OS
  • Set up Your Raspberry Pi
• Libraries
  • RPi.GPIO
• Install and Check the WiringPi
• GPIO Extension Board
• Download the Code
• 1 Output
  • 1.1.1 Blinking LED
  • 1.1.2 RGB LED
  • 1.1.3 LED Bar Graph
  • 1.1.4 7-segment Display
  • 1.1.5 4-Digit 7-Segment Display
  • 1.1.6 LED Dot Matrix
  • 1.1.7 I2C LCD1602
  • 1.2.1 Active Buzzer
  • 1.2.2 Passive Buzzer
  • 1.3.1 Motor
  • 1.3.2 Servo
  • 1.3.3 Stepper Motor
  • 1.3.4 Relay
• 2 Input
  • 2.1.1 Button
  • 2.1.2 Slide Switch
  • 2.1.3 Tilt Switch
  • 2.1.4 Potentiometer
  • 2.1.5 Keypad
  • 2.1.6 Joystick
  • 2.2.1 Photoresistor
  • 2.2.2 Thermistor
  • 2.2.3 DHT-11
  • 2.2.4 PIR
  • 2.2.5 Ultrasonic Sensor Module
  • 2.2.6 MPU6050 Module
  • 2.2.7 MFRC522 RFID Module
• 3 Extension
  • 3.1.1 Counting Device
  • 3.1.2 Welcome
  • 3.1.3 Reversing Alarm
  • 3.1.4 Smart Fan
  • 3.1.5 Battery Indicator
  • 3.1.6 Motion Control
  • 3.1.7 Traffic Light
  • 3.1.8 Overheat Monitor
  • 3.1.9 Password Lock
  • 3.1.10 Alarm Bell
  • 3.1.11 Morse Code Generator
  • 3.1.12 GAME– Guess Number
  • 3.1.13 GAME– 10 Second
  • 3.1.14 GAME– Not Not
• 4 IOT
  • Quick Guide on Cloud4RPi
  • Learn More about control.py
  • Projects
• Play with Nodejs
  • What is Nodejs？
  • Install or update nodejs and npm
  • Check the pigpio
  • Output
  • Input
• Play with Processing
  • What is Processing？
  • Install the Processing
  • Install Hardware I/O
  • Projects
• Play with Scratch
  • Quick Guide on Scratch
  • Projects
• Appendix
  • I2C Configuration
  • SPI Configuration
  • Remote Desktop
• FAQ
  • C code is not working?
• Thank You

Copyright Notice

All contents including but not limited to texts, images, and code in this manual are owned by the SunFounder Company. You should only use it for personal study,investigation, enjoyment, or other non-commercial or nonprofit purposes, under therelated regulations and copyrights laws, without infringing the legal rights of the author and relevant right holders. For any individual or organization that uses these for commercial profit without permission, the Company reserves the right to take legal action.