Note

Hello, welcome to the SunFounder Raspberry Pi & Arduino & ESP32 Enthusiasts Community on Facebook! Dive deeper into Raspberry Pi, Arduino, and ESP32 with fellow enthusiasts.

Why Join?

• Expert Support: Solve post-sale issues and technical challenges with help from our community and team.

• Learn & Share: Exchange tips and tutorials to enhance your skills.

• Exclusive Previews: Get early access to new product announcements and sneak peeks.

• Special Discounts: Enjoy exclusive discounts on our newest products.

• Festive Promotions and Giveaways: Take part in giveaways and holiday promotions.

👉 Ready to explore and create with us? Click [here] and join today!

Install and Configure EzBlock Studio

As soon as the robot is assembled, you will need to carry out some basic operations.

• Install EzBlock Studio: Download and install EzBlock Studio on your device or use the web-based version.

Note

If you are using the Raspberry Pi 5, please download the Beat version. Have any questions or issues during using? please don’t hesitate to contact us.

• Connect the Product and EzBlock: Configure Wi-Fi, Bluetooth and calibrate before use.

• Open and Run Examples: View or run the related example directly.

Note

After you connect the Picar-x, there will be a calibration step. This is because of possible deviations in the installation process or limitations of the servos themselves, making some servo angles slightly tilted, so you can calibrate them in this step.

But if you think the assembly is perfect and no calibration is needed, you can also skip this step.