Nota

Ciao, benvenuto nella Community SunFounder per gli appassionati di Raspberry Pi, Arduino ed ESP32 su Facebook! Approfondisci le tue conoscenze su Raspberry Pi, Arduino ed ESP32 insieme ad altri appassionati.

Perché Unirsi a Noi?

  • Supporto Esperto: Risolvi problemi post-vendita e affronta le sfide tecniche con l’aiuto della nostra community e del nostro team.

  • Impara e Condividi: Scambia suggerimenti e tutorial per migliorare le tue competenze.

  • Anteprime Esclusive: Ottieni accesso anticipato agli annunci di nuovi prodotti e alle anteprime.

  • Sconti Esclusivi: Approfitta di offerte esclusive sui nostri prodotti più recenti.

  • Promozioni Festive e Giveaway: Partecipa a concorsi e promozioni speciali durante le festività.

👉 Pronto a esplorare e creare con noi? Clicca su [here] e unisciti oggi stesso!

Assemble Videos

Before assembling the PiDog, please first verify that all parts and components have been included. If there are any missing or damaged components, please contact SunFounder immediately at service@sunfounder.com to resolve the issue as soon as possible.

PiDog V2 Assembly Tutorial (Raspberry Pi 4/5)

This video will walk you through the complete assembly process of the PiDog V2 version, which is compatible with Raspberry Pi 4 and Raspberry Pi 5.

Nota

The assembly steps in the video may differ slightly from the printed instructions you have. Please prioritize following the printed instructions. If any steps are unclear, you can refer to the video for further clarification.

In this tutorial, you will learn:

  • Preparation: We’ll introduce you to all the tools and parts needed, ensuring you’re fully equipped before starting the assembly.

  • Assembly Steps: We’ll demonstrate each assembly step in a systematic manner.

  • Tips and Considerations: Throughout the process, we’ll share essential tips and tricks to help you avoid common mistakes and ensure your robot operates smoothly.

  • Zeroing a Servo: Before fixing each servo, it needs to be zeroed first. The steps for zeroing are to first install the Raspberry Pi OS, then install the required modules, and then run a script (set the angle of all PWM pins to 0). After that, plug in the servo wire to zero the servo.

PiDog V1 Assembly Tutorial (Raspberry Pi 4/3/1)

This video will walk you through the process of assembling your V1 robot from scratch.

Nota

The assembly steps in the video may differ slightly from the printed instructions you have. Please prioritize following the printed instructions. If any steps are unclear, you can refer to the video for further clarification.

In this tutorial, you will learn:

  • Preparation: We’ll introduce you to all the tools and parts needed, ensuring you’re fully equipped before starting the assembly.

  • Assembly Steps: We’ll demonstrate each assembly step in a systematic manner.

  • Tips and Considerations: Throughout the process, we’ll share essential tips and tricks to help you avoid common mistakes and ensure your robot operates smoothly.

  • Zeroing a Servo: Before fixing each servo, it needs to be zeroed first. The steps for zeroing are to first install the Raspberry Pi OS, then install the required modules, and then run a script (set the angle of all PWM pins to 0). After that, plug in the servo wire to zero the servo.

Il processo di assemblaggio del PiDog è piuttosto lungo, quindi lo abbiamo suddiviso in due video. Il primo video copre l’assemblaggio del corpo e delle quattro zampe del PiDog.

Il secondo video si concentra sull’assemblaggio della testa e sulla calibrazione.

Mount Raspberry Pi Zero 2W on PiDog

If your mainboard is a Raspberry Pi Zero 2W, here are the steps to install it on the PiDog.

Nota

The assembly steps in the video may differ slightly from the printed instructions you have. Please prioritize following the printed instructions. If any steps are unclear, you can refer to the video for further clarification.

Afterward, you can continue following the instructions in the video below from 2:28 onwards to assemble it.