Note

Hello, welcome to the SunFounder Raspberry Pi & Arduino & ESP32 Enthusiasts Community on Facebook! Dive deeper into Raspberry Pi, Arduino, and ESP32 with fellow enthusiasts.

Why Join?

  • Expert Support: Solve post-sale issues and technical challenges with help from our community and team.

  • Learn & Share: Exchange tips and tutorials to enhance your skills.

  • Exclusive Previews: Get early access to new product announcements and sneak peeks.

  • Special Discounts: Enjoy exclusive discounts on our newest products.

  • Festive Promotions and Giveaways: Take part in giveaways and holiday promotions.

👉 Ready to explore and create with us? Click [here] and join today!

Assemble the PiCar-X

Before assembling the PiCar-X, please first verify that all parts and components have been included. If there are any missing or damaged components, please contact SunFounder immediately at service@sunfounder.com to resolve the issue as soon as possible.

Mount Raspberry Pi Zero W on PiCar-X

If your mainboard is a Raspberry Pi Zero W, here are the steps to install it on the PiCar-X.

Note

The assembly steps in the video may differ slightly from the printed instructions you have. Please prioritize following the printed instructions. If any steps are unclear, you can refer to the video for further clarification.

Afterward, you can continue following the instructions in the video below from 1:45 onwards to assemble it.

Assembly Tutorial Video(Raspberry Pi 4/3/1 Model)

This video will walk you through the process of assembling your robot from scratch.

Note

The assembly steps in the video may differ slightly from the printed instructions you have. Please prioritize following the printed instructions. If any steps are unclear, you can refer to the video for further clarification.

In this tutorial, you will learn:

  • Preparation: We’ll introduce you to all the tools and parts needed, ensuring you’re fully equipped before starting the assembly.

  • Assembly Steps: We’ll demonstrate each assembly step in a systematic manner.

  • Tips and Considerations: Throughout the process, we’ll share essential tips and tricks to help you avoid common mistakes and ensure your car operates smoothly.

  • Zeroing a Servo: Before fixing each servo, it needs to be zeroed first. The steps for zeroing are to first install the Raspberry Pi OS, then install the required modules, and then run a script (set the angle of all PWM pins to 0). After that, plug in the servo wire to zero the servo.