Note

Hello, welcome to the SunFounder Raspberry Pi & Arduino & ESP32 Enthusiasts Community on Facebook! Dive deeper into Raspberry Pi, Arduino, and ESP32 with fellow enthusiasts.

Why Join?

  • Expert Support: Solve post-sale issues and technical challenges with help from our community and team.

  • Learn & Share: Exchange tips and tutorials to enhance your skills.

  • Exclusive Previews: Get early access to new product announcements and sneak peeks.

  • Special Discounts: Enjoy exclusive discounts on our newest products.

  • Festive Promotions and Giveaways: Take part in giveaways and holiday promotions.

👉 Ready to explore and create with us? Click [here] and join today!

TT Motor¶

../_images/tt_motor_xh.jpg

This is a TT DC motor with a gear ratio of 1:48, it comes with 2 x 250mm wires with XH2.54-2P connector.

You can power these motors with 3 ~ 6VDC, but of course, they will go a little faster at higher voltages.

Note that these are very basic motors with no built-in encoder, speed control or position feedback. The voltage goes in and the spin comes out. There will be variation from motor to motor, so if you need precise motion, you’ll need a separate feedback system.

Features

  • Rated Voltage: 3~6V

  • Continuous No-Load Current: 150mA +/- 10%

  • Min. Operating Speed (3V): 90+/- 10% RPM

  • Min. Operating Speed (6V): 200+/- 10% RPM

  • Stall Torque (3V): 0.4kg.cm

  • Stall Torque (6V): 0.8kg.cm

  • Gear Ratio: 1:48

  • Body Dimensions: 70 x 22.3 x 36.9mm

  • Wires: Gray and Black, 24AWG, 250mm

  • Connector: XH2.54-2P

  • Weight: 30.6g

Dimensional Drawing

Unit: mm

../_images/motor_size.jpg