Pironman 5 Series - NVMe M.2 SSD PCIe Mini PC Case for Raspberry Pi 5

Welcome to the official guide for the Pironman 5 Series products. This guide will help you identify your specific product within the series and provide step-by-step instructions for setup and installation.

Use the images below to identify the product you purchased. Once identified, click the corresponding link to access the detailed product introduction and specifications. After reviewing the introduction, you can proceed with system installation and the setup of the pironman5 software.

Based on the images below, select the product you own to learn more. Each link will take you to the respective product’s introduction page.

Pironman 5	Pironman 5 Pro MAX	Pironman 5 MAX	Pironman 5 Mini

Below is a comparison of specifications for the Pironman 5, Pironman 5 Mini and Pironman 5 MAX. Use this table to understand the differences between these products.

Pironman 5 Series Comparison
Specifications	Pironman 5	Pironman 5 Pro MAX	Pironman 5 MAX	Pironman 5 Mini
Compatible Devices	Raspberry Pi 5	Raspberry Pi 5	Raspberry Pi 5	Raspberry Pi 5
Input	USB Type C, 5V/5A	USB Type C, 5V/5A	USB Type C, 5V/5A	USB Type C, 5V/5A
Power Button	✔	✔	✔	✔
Exterior Material 1	Silver Aluminum Alloy	Black Aluminum Alloy	Black Aluminum Alloy	Silver Aluminum Alloy
Exterior Material 2	Transparent Acrylic	Black Acrylic	Black Acrylic	Black Acrylic
Cooler	Tower Cooler	Tower Cooler	Tower Cooler	Active Cooler
IR Receiver	✔	✔	✔	X
GPIO Fans Number	2	2	2	1
Fan RGB Mode	Sync with Fan	Sync with Fan	Independent Control	Independent Control
HDMI Ports	2 Standard HDMI Ports	2 Standard HDMI Ports	2 Standard HDMI Ports	2 Micro HDMI Ports
OLED Display	✔	✔	✔	X
OLED Activation	Wake on Button	Wake on Button	Wake on Button
Support NVMe SSD	1	2	2	1
Dimension	111.9x78.5x117mm	140.9x77.0x138.7mm	111.9x78.5x117mm	67.8x98.6x101.5mm

If you have any questions, please send an email to service@sunfounder.com and we will respond as soon as possible.

Note

It is recommended to use the official 27W power supply or SunFounder 27W PD Power Supply for the Pironman 5 series products to avoid insufficient power supply, which may cause the Raspberry Pi 5 to reboot.

Copyright Notice

All contents including but not limited to texts, images, and code in this manual are owned by the SunFounder Company. You should only use it for personal study,investigation, enjoyment, or other non-commercial or nonprofit purposes, under therelated regulations and copyrights laws, without infringing the legal rights of the author and relevant right holders. For any individual or organization that uses these for commercial profit without permission, the Company reserves the right to take legal action.