1. Introduce the RGB Boards¶
DO: Control data signal output
DI: Control data signal input
5V: 5V DC Supply Input
GND: Ground input
In this kit, there are 3 RGB Boards, each with 8 WS2812B, which can be used for cool light effect display or direction indication.
Features
Work Voltage: +3.5 ~ +5.3
RGB Type:WS2812B
Color: Full color
Port: SH1.0-3P
Demension: 71mm x 11mm
Working Temperature: -25 ~ 80
WS2812B
The WS2812B (WS2812B Datasheet) is a intelligent control LED light source that the control circuit and RGB chip are integrated in a package of 5050 components.
The DIN pin receive data from controller, the first WS2812B collect initial 24bit data then sent to the internal data latch, the other data which reshaping by the internal signal reshaping amplification circuit sent to the next cascade WS2812B through the DO pin.
Schematic Diagram
Here is the schematic of the RGB Board (4 WS2812B’s are shown here, 8 in total)
Data Transfer
As shown in the diagram below, the 24 bit data is passed from the tail RGB board to the bottom left RGB board, then to the bottom right RGB board when programming.