.. note::

    Hello, welcome to the SunFounder Raspberry Pi & Arduino & ESP32 Enthusiasts Community on Facebook! Dive deeper into Raspberry Pi, Arduino, and ESP32 with fellow enthusiasts.

    **Why Join?**

    - **Expert Support**: Solve post-sale issues and technical challenges with help from our community and team.
    - **Learn & Share**: Exchange tips and tutorials to enhance your skills.
    - **Exclusive Previews**: Get early access to new product announcements and sneak peeks.
    - **Special Discounts**: Enjoy exclusive discounts on our newest products.
    - **Festive Promotions and Giveaways**: Take part in giveaways and holiday promotions.

    👉 Ready to explore and create with us? Click [|link_sf_facebook|] and join today!

Powered by PiPower
====================

**Required Components**

* TS7-Pro Screen
* `PiPower <https://www.amazon.com/dp/B09QKJTQKJ?ref=myi_title_dp>`_ + 2 18650 batteries (self-provided)
* Raspberry Pi (Self-provided)

Hole size for mounting the PiPower:

.. image:: img/power8.png


**Mount the PiPower**

If you buy our `PiPower <https://www.amazon.com/dp/B09QKJTQKJ?ref=myi_title_dp>`_, you can use it to power the TS7-Pro screen directly, so you can easily get it for outdoor use. 
The specific installation tutorial is as follows.

#. Remove the Protective Cover Plate.

    .. image:: img/power1.jpg

#. Secure the `PiPower <https://www.amazon.com/dp/B09QKJTQKJ?ref=myi_title_dp>`_ to the Protective Cover Plate. Note that the M2.5x6mm screws in the `PiPower <https://www.amazon.com/dp/B09QKJTQKJ?ref=myi_title_dp>`_ are required here.

    .. image:: img/power2.jpg

#. Put the Protective Cover Plate back on.

    .. image:: img/power3.jpg

#. Connect the `PiPower <https://www.amazon.com/dp/B09QKJTQKJ?ref=myi_title_dp>`_ to the Raspberry Pi with a USB cable.

    .. image:: img/power4.jpg

#. Turning the `PiPower <https://www.amazon.com/dp/B09QKJTQKJ?ref=myi_title_dp>`_ switch to ON will allow the Raspberry Pi to boot up.


    .. image:: img/power6.jpg