.. note::

    Hello, welcome to the SunFounder Raspberry Pi & Arduino & ESP32 Enthusiasts Community on Facebook! Dive deeper into Raspberry Pi, Arduino, and ESP32 with fellow enthusiasts.

    **Why Join?**

    - **Expert Support**: Solve post-sale issues and technical challenges with help from our community and team.
    - **Learn & Share**: Exchange tips and tutorials to enhance your skills.
    - **Exclusive Previews**: Get early access to new product announcements and sneak peeks.
    - **Special Discounts**: Enjoy exclusive discounts on our newest products.
    - **Festive Promotions and Giveaways**: Take part in giveaways and holiday promotions.

    👉 Ready to explore and create with us? Click [|link_sf_facebook|] and join today!

HARDWARE DESCRIPTION
===========================

**Features**

* Resolution: 1280x800
* Plug & Play
* 10-point Touch Capacitive Screen
* Power Input: DC 12V/1.5A
* Power Output: USB Type A 5V/3A
* Aspect Ratio：8:05
* Consumption: 7W
* LCD Type: IPS
* Speaker: 8Ω/2W

**Back**

.. image:: img/ts10_back.jpg


This is the back of it, with the main board, speakers and touch module pre-installed. To use it, just attach your control board to it and connect all the wires.


**Touch Module**

.. image:: img/touch_module.jpg

There are two types of 4pin connector on the touch module, with the pin serial number shown on the figure.

Here are the definitions of the pins:

* Pin 1: VDD(5V)
* Pin 2: D-
* Pin 3: D+
* Pin 4：GND



**LED Indicators**

.. image:: img/led_2.jpg
    :width: 400
    :align: center

* Power on the screen, after the Signal LED flashes one time, it lights on continuously; and the Power LED lights on immediately.
* If there's no HDMI signal, only the Power LED will turn on.
* If there's an HDMI signal, these two LEDs will turn on.
* If you press the power button, the Signal LED will turn off and the Power LED will keep turning on.
* If you remove the power adapter, both of the two LEDs will turn off.


**Buttons**

.. image:: img/buttons.jpg
    :width: 500
    :align: center

Buttons on the main board and their functions: 

.. list-table:: 
    :header-rows: 1

    * - 
      - Working
      - Sleep
      - Menu
      - Volume Adjust
      - Brightness Adjust
    * - Power
      - Enter Sleep state
      - Enter Working state
      - Enter Sleep state
      - Enter Sleep state
      - Enter Sleep state
    * - Menu
      - Open the Menu
      - 
      - Confirm
      -
      -
    * - "+"
      - Increase Volume
      -
      - "+"
      - Increase Volume
      - Increase Brightness
    * - "-"
      - Decrease Volume
      -
      - "-"
      - Decrease Volume
      - Decrease Brightness
    * - Back
      - Open the Brightness adjust
      -
      - back
      - back
      - back



**Ports**

.. image:: img/port2.jpg
    :width: 400
    :align: center

On one side of the main board there are ports of HDMI input, 12V power input, and 5V/3A USB power output and Speaker Port.