Note

Hello, welcome to the SunFounder Raspberry Pi & Arduino & ESP32 Enthusiasts Community on Facebook! Dive deeper into Raspberry Pi, Arduino, and ESP32 with fellow enthusiasts.

Why Join?

  • Expert Support: Solve post-sale issues and technical challenges with help from our community and team.

  • Learn & Share: Exchange tips and tutorials to enhance your skills.

  • Exclusive Previews: Get early access to new product announcements and sneak peeks.

  • Special Discounts: Enjoy exclusive discounts on our newest products.

  • Festive Promotions and Giveaways: Take part in giveaways and holiday promotions.

👉 Ready to explore and create with us? Click [here] and join today!

Installing the OS on a Micro SD Card

If you are using a Micro SD card, you can follow the tutorial below to install the system onto your Micro SD card.

Required Components

  • A Personal Computer

  • A Micro SD card and Reader

Steps

  1. Insert your SD card into your computer or laptop using a Reader.

  2. Within the Raspberry Pi Imager, click Raspberry Pi Device and select the Raspberry Pi 5 model from the dropdown list.

    ../_images/os_choose_device_pi5.png

  3. Select Operating System and opt for the recommended operating system version.

    ../_images/os_choose_os.png

  4. Click Choose Storage and select the appropriate storage device for the installation.

    ../_images/os_choose_sd.png

  5. Click NEXT and then EDIT SETTINGS to tailor your OS settings.

    ../_images/os_enter_setting.png

    • Define a hostname for your Raspberry Pi. The hostname is your Raspberry Pi’s network identifier. You can access your Pi using <hostname>.local or <hostname>.lan.

      ../_images/os_set_hostname.png

    • Create a Username and Password for the Raspberry Pi’s administrator account. Establishing a unique username and password is vital for securing your Raspberry Pi, which lacks a default password.

      ../_images/os_set_username.png

    • Configure the wireless LAN by providing your network’s SSID and Password.

      Note

      Set the Wireless LAN country to the two-letter ISO/IEC alpha2 code corresponding to your location.

      ../_images/os_set_wifi.png

    • To remotely connect to your Raspberry Pi, enable SSH in the Services tab.

      • For password authentication, use the username and password from the General tab.

      • For public-key authentication, choose “Allow public-key authentication only”. If you have an RSA key, it will be used. If not, click “Run SSH-keygen” to generate a new key pair.

      ../_images/os_enable_ssh.png

    • The Options menu lets you configure Imager’s behavior during a write, including playing sound when finished, ejecting media when finished, and enabling telemetry.

      ../_images/os_options.png

  6. When you’ve finished entering OS customisation settings, click Save to save your customisation. Then, click Yes to apply them when writing the image.

    ../_images/os_click_yes.png

  7. If the SD card contains existing data, ensure you back it up to prevent data loss. Proceed by clicking Yes if no backup is needed.

    ../_images/os_continue.png

  8. When you see the “Write Successful” popup, your image has been completely written and verified. You’re now ready to boot a Raspberry Pi from the Micro SD Card!

    ../_images/os_finish.png