.. include:: /index.rst :start-after: start_hello_message :end-before: end_hello_message .. _fan_mini: Fans ============ Active Cooler ---------------- The Active Cooler on the Pironman 5 Mini is controlled by the Raspberry Pi system. .. image:: img/active_cooler.png Regarding cooling solutions for the Raspberry Pi 5, especially under heavy load, the design of the Pironman 5 Mini incorporates a smart cooling system. It features a primary Active Cooler (active cooler) and a supplementary RGB fan. The cooling strategy is closely integrated with the Raspberry Pi 5's thermal management system. The Active Cooler's operation is based on the Raspberry Pi 5's temperature: * Below 50°C, the Active Cooler remains off (0% speed). * At 50°C, the fan starts at a low speed (30% speed). * Reaching 60°C, the fan increases to a medium speed (50% speed). * At 67.5°C, the fan ramps up to a high speed (70% speed). * At 75°C and above, the fan operates at full speed (100% speed). This temperature-to-speed relationship also applies when the temperature decreases, with a 5°C hysteresis. The fan speed reduces when the temperature falls 5°C below each of these thresholds. * Commands to monitor the Active Cooler. To check the Active Cooler's status: .. code-block:: shell cat /sys/class/thermal/cooling_device0/cur_state * To view the Active Cooler's speed: .. code-block:: shell cat /sys/devices/platform/cooling_fan/hwmon/*/fan1_input In the Pironman 5 Mini, the Active Cooler is a critical component for maintaining optimal operating temperatures, particularly during intensive tasks, ensuring the Raspberry Pi 5 runs efficiently and reliably. RGB Fan ------------------- .. image:: img/size_fan.png * **Extermal dimension**: 40*40*10MM * **Weight**: 13.5±5g/pcs * **Life**: 40,000 hours (room temperature 25°C) * **Maximum Air Flow**: 2.46CFM * **Max.Air Pressure**: 0.62mm-H2O * **Accoustic Sound**: 22.31dBA * **Rated Input power**: 5V/0.1A * **Rated Speed**: 3500±10%RPM * **Operating Temperature**: -10℃~+70℃ * **Storage Temperature**: -30℃~+85℃