.. note::

    Hello, welcome to the SunFounder Raspberry Pi & Arduino & ESP32 Enthusiasts Community on Facebook! Dive deeper into Raspberry Pi, Arduino, and ESP32 with fellow enthusiasts.

    **Why Join?**

    - **Expert Support**: Solve post-sale issues and technical challenges with help from our community and team.
    - **Learn & Share**: Exchange tips and tutorials to enhance your skills.
    - **Exclusive Previews**: Get early access to new product announcements and sneak peeks.
    - **Special Discounts**: Enjoy exclusive discounts on our newest products.
    - **Festive Promotions and Giveaways**: Take part in giveaways and holiday promotions.

    👉 Ready to explore and create with us? Click [|link_sf_facebook|] and join today!

.. _cpn_tt_motor:

TT Motor
==============


.. image:: img/tt_motor.jpg
    :width: 400
    :align: center

This is a TT DC gearbox motor with a gear ratio of 1:48, it comes with 2 x 200mm wires with 0.1" male connectors that fit into a breadboard. Perfect for plugging into a breadboard or terminal block.

You can power these motors with 3 ~ 6VDC, but of course, they will go a little faster at higher voltages.

Note that these are very basic motors with no built-in encoder, speed control or position feedback. The voltage goes in and the spin comes out. There will be variation from motor to motor, so if you need precise motion, you'll need a separate feedback system.

**Technical Details**

* Rated Voltage: 3~6V
* Continuous No-Load Current: 150mA +/- 10%
* Min. Operating Speed (3V): 90+/- 10% RPM
* Min. Operating Speed (6V): 200+/- 10% RPM
* Stall Torque (3V): 0.4kg.cm
* Stall Torque (6V): 0.8kg.cm
* Gear Ratio: 1:48
* Body Dimensions: 70 x 22 x 18mm
* Wires Length: 200mm & 28 AWG
* Weight: 30.6g

**Dimensional Drawing**

.. image:: img/motor_size.jpg

**Example**

* :ref:`ar_motor` (Basic Project)
* :ref:`car_move` (Car Project)
* :ref:`car_speed` (Car Project)
* :ref:`iot_car` (IoT Project)
* :ref:`sh_test` (Scratch Project)