SunFounder Icecube Tower Cooler

_images/icecube.jpg

  • Product Size: 55.75*35.5*61mm

  • Fan Size: 40*40*10mm

  • HS Material: Aluminum

  • Fan speed: 3500RPM

  • Bearing Type: sleeve bearing

  • Rated Voltage: 5V

  • RGB LED

This is a tower cooler designed for Raspberry Pi 3B+/4B, it has the following advantages.

  • Compatible with Raspberry Pi 4 B and Raspberry Pi 3 B+, easy to assemble.

  • Super Cooler - (Ambient temperature 25℃) Raspberry Pi 4 Model B 2gb version Idle Test: around 29℃; Full Load: less than 37℃; Overclock（2147 MHz）: less than 46℃

  • Tower Structure - 28 Aluminium Fins and 5mm Copper Pipe provides effectively excellent heat dissipation.

  • Silent RGB LED Fan - Speed: 3500RPM; Air Flow: 2.46CFM; Noise Level: 22.32dBA; Rated Power: 0.4W @5V, 0.08A.

  • Cooling 4 Chips - Not just the CPU, the cooling base also covers the RAM, Ethernet and USB chips.

Components List

_images/list.png

Assemble Instructions

_images/assemble.png

Specifications

Mechanical and Electrical Parameters

Mechanical and Electrical Parameters

Extermal dimension

40 * 40 * 10MM

Weight

13.5±5g/pcs

Bearing

sleeve bearing

life

40,000 hours (Ambient temperature 25℃)
Electrical Parameters

Rated voltage

5V

Rated current

0.08 A(Max: 0.10 A)

Rated input power

0.40 W(Max: 0.50 W)
Efficiency

Rated speed

3500±10%RPM (tested in Ambient temperature 25℃ after 3 minutes of operation)

Maximum air flow

2.46CFM

Maximum air pressure

0.62mm-H2O

Accoustic sound

22.31dBA
Characteristics

Operating voltage range

3V ~ 5.5V

Starting voltage

3V

Operating temperature

-10℃ ~ +70℃

Storage temperature

-30℃ ~ +85℃

Characteristic Curve

_images/table.png

Dimensional Drawing

Fan

_images/fan.png

Metal Support

_images/support1.png _images/support2.png

Tower Cooler

_images/cooler.png

Warning

  • Do not touch the blades, or let the power wires wrap around the fan, or pull the power wires with force to avoid damaging the fan.

  • Do not use in environments with flammable gases or any danger.

  • When the fan is working, please do not try to lock the fan for a long time. If you do so, the fan will burn out due to the high heat generated by the continuous stoppage.

  • When assembling the fan, please pay special attention to the noise generated by resonance or vibration.

  • Do not drop the Icecube Tower Cooler from height, as this may affect the balance of the fan’s blades.

How to Replace Fan

If you do not like this current fan with RGB or the pre-installed fan has broken, you can refer to the following tutorial to replace it.

Materials to prepare

  • 1 x Non-RGB Fan

  • 2 x Fan Clip

  • 1 x Wrench

Note

  • Please power off the Raspberry Pi first.

  • You need to be careful when removing the fan clip, it may pop out.

  • Pay attention to the direction of the Non-RGB fan (black), the side with the label (ICECUBE) should be facing you.

  • A wrench is used to keep the Fan Clip in the right position.